Defense of Marriage Act

Now do national reciprocity with pistol permits.

Yeah, right.

Gas Cans

I had a discussion about Jerry Cans with two brothers that are friends of mine the other day. A guy they know is selling off his "stuff" and has a pile of WWII era cans. I related that I have several modern NATO surplus ones for my generator, and the older brother asked if I wanted to buy any. I declined because of their age, probable condition of the insides, and my spout won't fit. The older version has a screw on cap retained by a chain. Mine have the smaller opening with a lever operated cap and a locking pin. My spout mounts to the opening in place of the cap. These containers are forbidden to be sold in Kommiecticut by state law courtesy of the environazis that prefer safety cans that spill gas all over. Some companies don't give a shit and sell them anyway with a disclaimer about not using them for fuel. HA!

Today I read a couple of blog posts on Commander Zero about gas cans, prompting me to want to buy more for myself. I went to where I bought them from before, Lexington Container out of Kentucky. Not only were they HOLY SHIT! expensive ($79.99 for a 5 gallon can), but every version of their NATO Jerry can was out of stock. Then I saw the link in this post and checked it out. Such a deal! Four brand new cans for $179.95, and my math says just under $45 per can, which is less than what I paid several years ago. They don't play tax collector for Kommiecticut so add only the $23.83 for regular ground shipping and they are supposed to be here by Friday. That will give me 50 gallons of safely stored on hand gasoline down in my barn. All my gas is treated with Sta-Bil 360 and the cans are tagged. All the gas is cycled out and replaced every 6 months or so, and the generator tank is completely emptied and refilled once per year. Gas treated with Sta-Bil 360 can supposedly go two years, but I don't risk it. My generator starts right up and runs smoothly every time. 

As soon as they arrive and I inspect them, and they are as promised, they will get the Glypto Thumbs Up Endorsement. Stay tuned. 

UPDATE 11-30-22: It's official... The Glypto Thumbs Up Endorsement for these cans and roverparts.com. My Jerry Cans arrived this afternoon, but were delivered to Mrs. Bitchy McBitchy Bitchface's my neighbor's house. In a strange twist of personality, she actually brought my large package down and placed it in front of my garage door. I spoke to her over my Blink Outdoor camera. She asked if she should leave it in front of the garage and I told her that would be fine, and that I would be home in a few minutes to retrieve it. I thanked her for doing that and will also send her a hand written "Thank You" card. I then filed a complaint with FEDEX when I got back to the firehouse. The box was completely broken open spilling out the contents and soaking wet from the pouring rain, besides delivering to the wrong address. Luckily, none of the Jerry Cans were damaged. Unfortunately I had to give them one star out of five, because you can't leave a zero on a survey. Out here FEDEX drivers are contractors that do a shitty job with a simple task like delivery, and they drive like fucking maniacs.

UPDATE 12-1-22: Text of the "Thank You" card to my neighbor:

 Neighbor's Name

Thank you so much for bringing my misdelivered package down to
my house. I especially appreciate the extra effort it took in
terrible weather because it was large as well as damaged and
hard to handle. Fortunately the items inside were a little wet
but not damaged.

I slammed FEDEX in a delivery survey for their address screw up
and damaging my package. We'll see if it helps.

My Name

This Is My Personal Preference

I'm cleaning the rest of my guns from Friday's range outing this evening. I cleaned my SR9c right after I got home since at the moment it is my main concealed carry firearm. It seems most folks I know use Hoppe's No. 9, but this is my preference.

 

 

 

 

 

 

 

 

 

 

 

 

 

Since I don't shoot naked lead cast bullets, I don't need a lead solvent. My bores have copper fouling from my plated hand loads or jacketed commercial ammo. The receivers, mags, feed ramps, slides, and cylinders are covered in burnt powder residue. This product does an excellent job tackling both issues for me.

A Fire Before It Rains

My fire pit was full of dried brush so I decided to light it up before the rain predicted for this afternoon. As the brush got going good I threw on some well seasoned split hardwood to get it good and hot. The 2x4's are from a bench that needs new wood, so I took the chainsaw to it and cut about an inch away from the uprights. I won't add any more wood and just let it burn down.

 

 

 

Now there will be room in the fire pit come January if I need to dispose of my Christmas tree. I will offer it to the farm next door again first because the goats love it.

Black Friday? No... Bang Friday!

A weekday off means the opportunity to go to my club range. I loaded 200 rounds of .45 ACP last night, planning on shooting my Colt MarkIV Series 70 (which hasn't been shot in years) and my 45 Shield. I also had some old reloads, both purchased and my own to burn up. I wanted to do some more work with my two current carry guns from holster draw. The long guns were mostly going to be for fun banging the gongs, except my sniper type rifle. That was going to entail some scope range changing, as well as a comparison between my precision hand loads and commercial ammo.

PISTOLS 

First up was my Colt Mark IV Series 70. When I bought it in 1983, it was pretty much in standard government type issue, just like a 1911 marked "U.S. Property" would have been, but with a shiny blued finish. Mine now wears adjustable sights, a rubber Pachmyr grip, has a slide stop bushing, all new springs, pins and screws, and a barrel bushing compensator. Internally there are some bits from Chip McMormick. Skeletonized trigger and hammer, a high rise beaver-tail safety, and a sear set. I had forgotten how well this gun performs. After reacquainting my self with some target practice. I easily whacked the swinging plates at 25 yards, and then went to bowling pins. My hard hitting 200 grain flat point rounds hit the pins on the blue "American Bowling Congress" shield and took the pins cleanly and completely off where I had them sitting. This was my pin gun from back in the day, even before I tweaked it. I won my share of matches back then, maybe I'll get back into it.

Next up was the S & W 45 Shield for some draw and fire practice from both my OWB and pocket holsters. 7 yards at a B-27 silhouette using some older Hornady Critical Defense rounds I had put aside for this practice session. Recoil is only slightly more than my target rounds and easily manageable for me.

The last pistol I shot was my Ruger SR9c with some draw and fire practice from my On Your Six Designs OWB holster. I was going to do a full "Dicken Drill", but since I didn't have a shot timer and was trying more than 7 yards for the first time with a carry gun, I opted to start at 25 yards. I did OK, and am confident I could take out a target from behind cover, especially if I can brace myself. I then went to holster draws at 7 yards using a B-27 silhouette target. I did notice that I never had one instance of fail to fire with light primer strikes like I did on my last outing. Amazing what gunk inside the slide in the area of the firing pin will do to reliability. This is the first time firing it since I did that thorough cleaning. I only fired my 115 grain round nose copper plated hand loaded target rounds. I did not shoot the (ghost gun) other pistol in the case, or the Ruger GP-161 I had loaded on my hip for the day.

 

RIFLE

Another member and his guest showed up to shoot. The member has a S & W M&P 15-22 he brought just to plink with, but his guest was looking to verify zero on a Winchester Model 70 in 7mm Remington Magnum. I put my shooting on pause because he asked for my assistance. As far as he knew, his rifle was zeroed and he was just going to verify zero and holds. Well, something was amiss, because he wasn't even on paper at 100 yards and he asked me to try it out. First off, that rifle has a much stiffer trigger than I was expecting or used to, but at 100 yards I was holding on the center and should have been at least on paper. Nope. Then he started fiddling with the scope and things did not improve. I recommended they stop trying until they can shoot against a large sheet of paper to see where it is really hitting. They agreed and packed it in. The guy said the ammo was $47.99 for a box of 20. YIKES!

I brought several rifles with me but only fired my sniper type rifle. Rather than try precision shooting, I decided to engage targets as though they needed to be quickly eliminated, which would be more real world. I started at 200 yards with the 5 remaining rounds of PPU commercial ammo in the box to give me some more fire formed brass. At 200 yards it would have definitely been a kill, but the group was large and to the right of center. That was to be expected, since the commercial ammo is loaded with .308" bullets and my barrel slugs out to .311" I put 3 rounds on paper and whacked the 200 yard 12" gong twice. Then I switched to my precision loaded ammo using .311" Sierra MatchKings. Much tighter group at 200 yards and in the center of the target. I then dialed the scope back to the 100 yard zero setting and put 3 rounds right in the center of the target at 100 yards. Dialed back up the needed two inches of elevation and easily plugged the 6" gong at 200 yards, which makes a distinctive sound when hit. Back down to the normal setting and 2 rounds dead center of the 12" 100 yard gong (I saw the paint removed where the bullet struck) and that was that. There was no need to burn up any more precious ammo. I am confident in my ability to eliminate long range targets. Right now my dope card for actual fired rounds only goes to 200 yards, and until I can shoot at longer ranges, I have the estimated required elevations.

I packed everything up and spent the rest of the afternoon at the clubhouse, hanging out with several of the other members.

SECOND AMENDMENT NEWS

In the wake of the tranny club shooting in Colorado and the Walmart in Virginia, the demented meat puppet at 1600 Pennsylvania Ave. is ratcheting up his anti-gun rhetoric being pushed by his string pullers against all semi-automatic firearms, no longer just dreaded black rifles. HEY FUDDS & BUTTERS: think your favorite hunting firearm is safe from the gun-grabbing hoplophobes... HA!

Keep your powder dry and rope nearby.