Q: Why do I think there's a commie behind every tree?
A: BECAUSE THERE IS A FUCKING COMMIE BEHIND EVERY TREE!!


Utilize the language with the same manipulation the Commies do, using the phrase "VACCINE FREE" instead of "UNVACCINATED" or "NON-VACCINATED"

Tuesday, February 14, 2023

Not Shocked - Another Shooting In A GFDZ

Active shooter incident at Michigan State University.

 

Call for more gun control. Hearts and prayers. Lower the flags for the murder victims, blah blah blah blah BLAH!

How about we eliminate every single *GFDZ!!??

No more Run-Hide-Fight....

we go full on "CONFRONT-SHOOT AND KILL-STOP"






*GFDZ = Gun Free Death Zone

Monday, February 13, 2023

Next!

I finished loading the last 100 rounds of .357 Magnum this evening. After I cleared the press of powder and primers, I converted everything over to 9mm in preparation for a 200 round production run. I will probably get at least 100 done this coming Wednesday night. My current 9mm recipe is Winchester Brass, Berry's 115 gr copper plated round nose bullets, 4.3 grains of Bullseye powder, and Winchester Magnum Small Pistol primers. This load took a little experimentation to operate the action reliably without making it screaming hot. It chronographs out to an average of 1096 fps muzzle velocity. I will try to get over to Cabela's to see if I can get another 100 round cartridge case to house some more .38 Special and then load another 100.

Hopefully "the winter that never was" continues, meaning a range outing will be forthcoming soon.

Saturday, February 11, 2023

A Coupla Items

I have been working on this post since Friday afternoon, but have been interrupted by emergency calls and a busy schedule all today. I just restarted writing and plugging in photos at 9:15 PM this evening.


Loading ammo

I am in the process of loading some .357 Magnum target ammo that runs just under 1100 fps. I use either Federal or Remington brass. My recipe is Berry's 158 grain copper plated flat point bullets, 9.3 grains of Hogdgon HS-6 powder (.66 on the Lee Disk Powder Measure), and Winchester Magnum Small Pistol primers. Since these are for my six-guns or my Marlin 1894CB lever gun, I am not as picky with my brass as I am for my semi-autos. With semi-autos, conventional reloading wisdom is to separate brass by manufacturer for better consistency of the action, which at the level I shoot at is more about satisfying my OCD than anything else. Thursday night I did a run of 100 rounds of .357 Magnum. I plan on doing another 100 rounds when I have another block of uninterrupted time.























I run a Lee PRO-1000 3-die progressive press for my handgun ammo. When I finished for the night, I removed the primer tray and cleared the chute, then removed and emptied the powder hopper. I keep the press dust and dirt free by covering it with a dreaded (and banned in Kommiecticut) plastic shopping bag.

The press in full operation from a recent load of .45 ACP


 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The Lee Pro-1000 cleared after use


 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Covered with a verbotten plastic shopping bag. REUSE!!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Lee makes changing caliber easy by offering turret plates that lock into place, allowing the dies to stay seated and adjusted. All of my handgun dies are permanently mounted on turret plates. This one that I am currently using is for both .38 Special and .357 Magnum. The dies simply get backed out two full turns to accommodate the longer .357 Magnum rounds. I then fine tune the bullet seating die and measure with a caliper for an over all length (OAL) of 1.585". When I set up the press for a new caliber, I run several "dummy" test rounds with bullets but no powder or primers and measure the OAL. The bullets are then taken apart with a kinetic bullet puller and the components reused. I mark this particular turret with some gray electrical tape and a Sharpie for how it was last setup and used.

Close up of turret plate with mounted dies


 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The top of the press where the turret goes

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Locked in place and ready for loading


 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The other thing that needs to be changed for caliber is either just the shell plate or the whole shell plate carrier. I have two shell plate carriers; one is setup for large pistol primers, the one pictured below is set for small pistol primers. The shell plate needs to be changed to accommodate the particular caliber. The #1 shell plate in place is for .38 Special/.357 Magnum.

Small primer shell plate carrier installed on the press

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The large primer shell plate carrier. #2 plate for .45 ACP

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

If you look closely at the #2 shell plate, you will see dimples all over it. That was caused by the moron that originally owned my press slapping the operating lever up and down, which throws off the rotational timing of the shell plate. Movement of the operating lever is supposed to be smooth up and down. Those dimples were caused by the primer decapping pin slamming into the surface of the plate. It should never make such contact, but come down over one of the three holes in the shell plate where a shell would be sitting.

My current plan is to load 200 rounds of 9mm after I complete the .357 Magnum. Once I get another 100 round ammo box I can load an additional 100 rounds of .38 Special. Right now I would have no place to put them.

 

My sportsman's club 

I have been a probationary member since December 2020. Probationary status is reviewed annually with the probie standing up in front of the membership to talk about their activities and work for the club. Then other members have the opportunity to get up and speak about the member if they have something to say. The member is excused from the room and a secret paper ballot is held whether to allow the probation to continue. In January, the membership voted unanimously to renew my membership status for being an active member in good standing. At our recent February monthly meeting, the three probationary members that were ahead of me got moved up by membership vote to full regular membership, leaving me the most senior probie next in line.

I found out Thursday that another regular member slot has opened up. When I asked the membership chairman about it, he confirmed that fact and said he would be presenting me to the Executive Committee for preliminary approval at their February meeting. The following week at the March monthly meeting, I will be presented to the membership as a candidate to become a regular member. I refer to it like the Mafia, becoming a "made" guy because that's what it feels like. After becoming a regular member, I plan on becoming an official committee member for both the Range and Kitchen Committees.

 

Kommiecticut DOT train and bus commercials

I wish there were videos to plug in here but there aren't yet. Searches came up blank for those commercials. I'll do my best to describe them.

In the past week or so, I have been seeing commercials on TV and hearing them on local radio for riding the trains and buses instead of driving your own car. In the spots, they "interview" riders (that are obviously actors) about why they ride mass transit. They babble about all kinds of reasons; read a book, listen to music on headphones while watching the scenery go by (really?), watch a movie, catch up on their latest streaming series, save the planet (HA!), etc. Everything except being aware of your surroundings and situationally aware. In another life when I worked in technology, I would have to go Boston quite often. 

MBTA full map of Boston Lines

 

Most of the time I did not need my company vehicle full of tools and materials, just a small tool bag and my laptop. On those trips, I would park at the "T" Riverside Station in West Newton, MA and take the Green Line "D Train" into the city. From Park Street Station I could switch train lines to anywhere else in the city I needed to go. I was always armed with a tactical folder and stood in the stations or outdoor platforms with my back to the wall, giving me a 180 degree view of the platform. On the train I would position myself to watch the car entry doors for who got on, the ability for a quick exit, as well as the ends of the car for people moving between cars. I never slept or occupied myself with anything other than observing my surroundings. Everyone around me would be totally oblivious to everything around them. Think Col. Cooper's "Condition White." More than once, I bailed off the train at a stop because of who or what got on, and just got on the next train by in a couple of minutes. I remember riding the train a couple of times when they were crowded, and being the only person aboard not being a mesmerized zombie. I thought how easy it would be to walk down the center aisle with an ice pick in each hand and simply and silently kill an entire train car of people.

Thursday, February 9, 2023

The Dirty Little Secret - EXPOSED

Governor "Jolly Ned" Lamont feeling emboldened by his re-election has laid out his anti-Second Amendment agenda for his second term. Nothing more than yet another round of unconstitutional/intolerable acts that will all be challenged in court, joining the multitude of pending lawsuits already filed. This post speaks to just one proposal, making open carry in the state of Kommiecticut illegal. While it sounds like just another solution in search of a problem.... it is actually much more. I say it is evil.

Gov. "Jolly Ned" (he HATES that name) Lamont's gun control proposal receiving push back. GASP!!
















Very few people, myself included, actually open carry in the state. It is currently legal because by actually following constitutional principles, something is legal until it is outlawed. Kommiecticut has never had laws against open carry. That said, waltzing into a crowded shopping mall openly strapped will result in frightened hoplophobes calling the Po-Po. The Po-Po will arrive, guns drawn and arrest that individual, confiscate their firearm and pistol permit, and charge them with breach of peace and other bogus minor charges. That person will then spend big bucks to get a lawyer, go to court, have all charges summarily dismissed, and get their permit and firearm back. All they are in the end is hundreds of dollars poorer and publicly humiliated. I open carry in my home, on my property, walking my dog on my back country road, or hiking in the woods. Otherwise I am concealed and no one is the wiser.

So here is the dirty little secret. Because of what I just explained, the intention is to create a trap, that will do more than just steal your money and humiliate you, YOU WILL NOW BE AN ACTUAL CRIMINAL! Have the audacity to open carry and real criminal charges and penalties will be incurred. So no one in their right mind will attempt such a thing. What the REAL intention is, will be to nail to the wall any gun owners with a bulge in their jacket, or if they were to bend down to pick something up and maybe that nearby hoplophobe "thinks they see a firearm" or the breeze blows your shirt open exposing your concealed firearm and you can bet LE is coming for you. They cannot stand the fact that so many permit holders like myself carry everywhere every day.

Does any of this affect the criminal element. Absolutely not. If a criminal does get caught with a firearm illegally, those charges normally just get plead down or away. No... the intent is ALWAYS to target the peaceable gun owners of this state. Because you see, we have all been damned and condemned for every crime committed with a gun and every mass shooting, simply because we have the nerve to exercise our God given right to self defense instead of depending on the state for such things.

Wednesday, February 8, 2023

As Seen On TV

Commercials hawking HIV drugs Apretude and Dovato with all kinds of homo imagery.

But those are really unnecessary.

Here's how you easily prevent HIV without expensive drugs and their side effects:

1). Don't put your dick in another man's ass

2). Don't let another man put his dick in your ass

3). Stay away from crack whores and fag hags that will have sex with sodomites

4). Don't do IV drugs. Actually, don't do any drugs. That includes bogus mRNA Chi-Com Flu jabs. They make you make poor choices.

5). Oppose the globohomo agenda completely.

BONUS: These pointers will also work to prevent monkeypox gaypox