Home Construction Projects

Well, the basement door project came out beautifully, and is now ready for the new storm door. All I need to do is get Wifey to decide which door she wants. She has concerns with the pet door flap. Our friend's dogs refuse to use it on their new EMCO door, and she wants to take our dogs over their house to try it out. I don't think it is as big a deal as she does, but she is in charge of the dogs for the most part, so I relegate all authority to her on those matters.

One other thing I realized the builders fucked up on that delayed completion. They did not wrap the Tyvek sheet under the vinyl siding around the opening and into the house. They cut it flush with the edge of the siding. That left the plywood sheathing naked from the edge of the siding to the rough opening. Therefore, I primed and painted the plywood with 2 coats of exterior latex paint to add some extra protection against the elements. The door itself will get a fresh coat of paint after the storm door is installed and it is no longer exposed to the weather.

With that completed for now, it was on to the deck rehab. There were a couple of rotted floor boards, the stairs need repair, and the whole thing needs a pressure wash and water treatment application. I thought about replacing the entire deck floor boards. The deck is 12' x 18'. I need twenty five 5/4 x 6 deck boards 20' long. The thought was if not too pricey to just do it all over instead of piecing it together. Have you priced lumber lately? $50 a board for a total of $1250.00 plus tax before adding screws. YIKES! Just for ha-has, I wondered how much more synthetic decking would be. More than twice the price just for the deck boards, not including screws, mounting hardware, installation tools, screw plugs, etc. Guess it will just be a repair job. The initial haul from the building supply house was $290, and that included $40 for the brickmold to fix the door.

I started by removing and replacing the rotted floor boards. I thought I had screws. It turns out they weren't what I thought they were, they were too short. They were in a plastic bag that I had gotten from my Dad when he passed away. I figured I would grab the screws at Lowe's since I get a military discount there, and it would be an excuse to get out on "The Beast" for the afternoon. I also had a small busted bar clamp from Harbor Freight that required a free replacement, throw in a stop for lunch, hook up with my riding buddy after his doctor appointment, and there you go! $37 at Lowe's for 4 boxes of needed screws.

When I got home I screwed down the new boards and started dismantling the stairs. My wife asked that if the stairs were going to be replaced, could I widen them? Sure, since I had to replace the stringers, I would cut 1 extra and then install longer boards for stair treads and redo the railings. The stairs were in far worse shape than I thought.

Half the stairs and part of the railing removed. New deck floor boards in place

Close up of the rotten stringers. I will remove the rest when I start installing the new stairs.

I have decided not to reuse the 2 x 2 spindles. I will get all new ones wherever I removed old ones and redo the railing for the steps as well. I will also need to get a short pressure treated 2 x 6 and 2 x 4 for the railing top. Sigh... more money! But it will look nice when done.

Because it rained off and on all day, I worked in the garage to cut the new stringers after my wife left for the day. First thing I had to do, was clean and cover my bike to keep the sawdust off. I got them all cut from one 2 x 12 x 12' board. It was cheaper than buying pre-cut stringers which were about $40+ a piece depending on how many steps. 

The four new stringers. I used the one old stringer that was mostly intact for a pattern.

 

While working in the garage late this afternoon, I heard some lucky person exercising their 2nd Amendment rights over at my club range. There was a break in the weather for over an hour. It sounded like maybe an M1A to me.

Next up will be to complete the stair demo and get the concrete blocks set to the proper height, as well as put in the additional one. I'll probably go back to the supply house tomorrow for the additional lumber. Its less than 10 miles away, so not a big deal. Below is a photo of the debris pile so far that will need to go to the transfer station (dump). There is also a barrel of small pieces of scrap from cutting of the stringers sitting in the garage that needs to go too.

Still Finding Fuckups 16 Years Later

16 years. Thats how long we have been in our present house, which we had built. Even though I was on the job site every couple of days and photo documented virtually everything, mistakes were made and crappy workmanship was done. I found yet one more today.

We have a walkout basement, and that opens out to the fenced in yard for the dogs. The storm door we put on the basement door was beat to shit so we plan on replacing it with one that has a factory installed dog door. The brickmold around the insulated exterior door needed replacing as well. I bought some today at a local building supply house. It came primed and ready for paint, so I painted the surface that will butt up against the vinyl siding trim, because it can't be painted after its put up. I took off the old door, and got ready to demo the rotted brickmold.

 As I started to pry off the brickmold, I encountered some unexpected resistance in the form of 3" framing screws through the brickmold, plywood sheathing, and into the 2 x 6 framing. I had no idea why the builders did that until I got to the other side of the door where they also did it. The brickmold was what was holding the door frame in place so it was anchored outside with the extra screws. Who the fuck does that? Hacks, thats who.

Once I got all the brickmold removed I properly shimmed and nailed the latch side of the door frame to the framing members of the rough opening. The hinge side is held in by 3" screws at the hinges. The builders also neglected to put any insulation in the gaps around the door frame, so I used some spray in expanding foam. Since its not going to rain any time soon, I quit for the day. Construction called on account of darkness don'tcha know. Tomorrow I will cut and put up the new brickmold, and then give it two nice coats of white exterior latex. The door frame will be all ready for the new storm door when it comes in.

After I finish that, I will start on my deck rehab project.

Message 2021.0232

More fun using my skills learned at Fort Gordon, courtesy of Big Green!

 

44 39 44 33 45 20 55 42 33 37 59 20 4f 37 59 55 37 20 53 4d 30 48 44 20
30 44 37 4a 30 20 44 4c 59 30 30 20 56 37 46 4d 30 20 42 4d 4a 56 30 20
42 55 32 56 4d 20 32 59 55 4c 4d 20 32 42 56 4d 30 20 30 32 44 48 4f 20
59 34 41 49 4f 20 59 52 59 55 4c 20 48 44 52 56 55 20 4d 4f 56 30 30 20
56 55 52 30 32 20 33 42 59 30 4d

 

Fire up your super computers. I hope I burn time, money and valuable resources while you illegally spy on Patriotic Americans, you tyrannical commie motherfuckers!

All You Need Is Common Fucking Sense!

So the super smart doctors, bureaucrats, and other assorted fucktards lead by Dr. "Weepy" Wolensky at the CDC are going to be "considering" whether wearing a #MaskOfOppression outdoors is still necessary.

NEWSFLASH: It has never been, is not now, or ever will be in the future necessary to wear such stupid virtue signalling face coverings outdoors for the Chink Bug. In a dust storm, high pollen times (it gets so bad here you can see the clouds of it), smoke, desire to hide from facial recognition, or if you want to rob the stagecoach or train, then yeah, wear one outside. But truly "smart" folks already know this.

Strange

Gov. "Jolly" Ned Lamont is proposing the use of Kommiecticut taxpayer dollars to pay back bribes paid out by businesses of 500 employees or less to go get the "not a vaccine." These bribes are things like paid time off, free meals, gift cards, transportation, etc. that are provided by the employers. My question is; "why do you have to bribe people if the "not a vaccine" is just so fucking wonderful?" The question is rhetorical and the answer is quite obvious to those of us that have done any kind of research on the experimental jab.

Jolly Ned also said in todays presser that state contact tracers are going to start knocking on doors to encourage participation. Come knock on my door uninvited and you will immediately learn you are not welcome and should exit my property quickly for your own safety.