Q: Why do I think there's a commie behind every tree?
A: BECAUSE THERE IS A FUCKING COMMIE BEHIND EVERY TREE!!


Utilize the language with the same manipulation the Commies do, using the phrase "VACCINE FREE" instead of "UNVACCINATED" or "NON-VACCINATED"

Friday, June 7, 2024

Do You Have Arachnophobia?

I do not, however there are a few venomous varieties around so I tend to exercise caution when I see them or if I know they may be around. This guy was on the down spout on the corner of my garage, and that is right where I left him (her?)

A Brown Recluse













 

 

These are usually found in larger numbers much further south than Kommiecticut, but they are around here too. Habitat is moist dark areas. They only bite when you reach somewhere blindly and confine them against your flesh. Their bite can cause spreading necrosis of your skin, for which the only cure is surgically cutting away the affected area.

My wife calls all large spiders tarantulas, and she came into the house from the garage the other night to get me to move one. She knows they are beneficial and won't kill them, and knows I will come relocate it if she asks. I keep an old coffee can handy for these relocations because they can't get out until I release them. She found a very large Wolf Spider on some boxes she uses for dog training and it was easily moved into the can. She wanted a good look at it before I brought it outside, and as tempting as it was to thrust the can at her and yell "Braaaaaghh!" I did not. If I did that she would then rather kill every spider than to call me to move it in the future. Just doing my part for the environment, I guess. The spider was taken outside and the can tipped so the spider could get out and onto the Azalea bush by the door. I have found them traversing my driveway at night, because the LED motion sensor light reflects back on their tiny eyeballs. The light comes on when I go out to my truck, the spiders don't trip it.

We have other species of spiders that will put up and maintain a web during the summer, most commonly Black and Yellow Orb Weavers. I will catch a moth or fly and throw it into the web and watch the spider come and quickly dispatch it. One usually ends up in the basement window frame when I pull the screen out to put in the air conditioner, so the web is reachable. My version of feeding time at the zoo.

Monday, May 27, 2024

Ambitious Automotive Project Part 1

Toyota Tundra Bed Repair


First and foremost, I can not afford a replacement truck at this time. And like I've said about the EV mandates Kommiecticut keeps trying to implement, I will NEVER willingly buy one. Instead I will be like the Cubans that keep 70+ year old American vehicles on the road well into the 21st Century if I have to. 

Before you read all this and think me a fool, let me explain some back story. There was a known problem with the manufacturing process of 2nd Generation Toyota Tundra truck beds that came out of the Union Township, Indiana plant. The mounting point cross members were never rust-proofed where they attached to the underside of the bed floor. Therefore, any trucks that ended up in winter salt spreading geographic areas rusted from the inside out, with the rust cancer spreading to the truck bed pan. There was a Toyota Service Bulletin (#T-SB-0101-12) that is no longer available to view, however this link addresses the issue. I had never heard about it and initially discovered it too late when I pulled out my drop in bedliner for some damage I caused to the exterior of the bed for repair. Toyota refused to address the issue, for which the ONLY solution was complete bed replacement, even for a "customer good will replacement," so my rusting bed was made like new on the outside. This was sometime in 2013 or 2014? I don't remember exactly. I put the bedliner back in and the cap back on and let nature take its course.

Fast forward to the spring and summer of 2018. Toyota was court ordered from a class action lawsuit to completely replace any 2nd Generation Tundra frame that had a perforations 10mm or larger anywhere on the frame. If the holes were less than 10mm, no matter how many there were, they just sprayed the whole frame with Fluid Film and that was deemed "repaired." The process for all repairs was to bring it in for inspection and if it met the criteria, your truck would be immediately "RED TAGGED" and removed from the road. You would be given a rental for the duration. I had holes in places an inch wide and several inches long, as well as the end of a cross member that was completely gone. I received my postcard to bring my truck in any time. I was in the middle of selling my dearly departed Dad's house and needed my truck. I took photos and brought them in to the dealership service manager to look at. He said if that is what my frame looks like, I need to bring it in IMMEDIATELY! I said nope, I'll see you in a few months because I need my truck. The TSB covered trucks 12 years out from the in-service date regardless of mileage. My truck was originally purchased in November 2007, so I actually had another full year and a half to wait if I had to.

Dad's house was sold a couple of months later, but I waited until late November to bring my truck in for inspection. It was immediately taken off the road for frame replacement which was supposed to take 6 weeks. They wanted to put me in a sedan, but I stated that winter is coming and because of where I live, I have a 4x4 pickup truck for a reason and THAT IS WHAT YOU WILL PROVIDE! They did. I ended up in an Enterprise rental brand new Dodge Ram 1500 4x4 luxury edition truck. The dealership had an old body shop out back that they re-purposed just for frame replacements. Tundra trucks are completely modular so frame replacement only actually takes a few days. It takes weeks to order and build the specific frame required for my truck. While not a Dodge fan, that was a nice truck and did well for me to get around in, especially since it snowed a few days later. I was a regional over the road truck driver at the time, and the yard was 28 miles away so I made it back and forth safe and secure.

I visited the dealership when my truck was torn down to once again discuss the rusting bed issue. As you will see in the photos further in the post, the rusted out areas are right where the mounting bolts are. I asked them if they were really going to put that rusted out bed back on my truck and they assured me they would, that Toyota was not going to replace it. My next statement really pissed them off. I told them that when I round a corner going through an intersection and my bed breaks free, rolls off, and kills someone; I will be happy to join the plaintiff's in the wrongful death lawsuit against Toyota. My truck repair was completed and it was returned to me rusted bed and all. I put the bedliner back in and the cap back on.

Over the next 5 years I would see the rust progressing every time I got underneath to do routine maintenance, and knew at some point I would have to do something because it was getting real bad. Either remediate the problem or ditch the truck for a replacement. I have had many trucks in my life, and this one by far is the best I have ever owned, even with the rust issues so I would prefer to keep it. I bought it with 33K miles on it just off lease at the end of July 2010. I toyed with the idea of converting it to a flatbed using a pre-manufactured unit. I went to a local dealer that sells nicely made steel and aluminum units. Unfortunately, even the aluminum units would be too heavy for my 1/2 ton truck. He said the GVW of my truck would only allow me to carry a basket of flowers before I would be overweight. They only put those beds on Ford F-350's, GM 3500's, Ram 3500's. or bigger. I then searched for a used bed. Every single one in the region of NY and New England was rusted out as bad as mine for $1500+ and would still need to be painted to match my truck. There were rust-free beds available down south, starting at $3500, but I would need to go down with a trailer to get it, and then spend a few grand to get it repainted to match so that wasn't happening. The final option would be to remove my bed and repair it which is what I decided to do. I have a friend that lives close by, has a mobile welding service, and is real good at fabrication so I called him over to have a look. Knowing this is what I was going to do, I had already removed the cap and bedliner allowing him to see what it looked like top and bottom. He was confident that with the bed removed and lying upside down in the driveway, he could patch the holes and fabricate new bed mounts. Below are the photos of the bed still on the truck.

Front left mounting bolt area









Front right mounting bolt area









Middle Left mounting bolt area









Notice the aluminum sheet metal patch with pop rivets. When I got my truck back from the frame replacement, this was the only area completely rusted through. I put the patch there to keep the elements out. Even that got eaten up by the corrosive shit Kommiecticut puts on the roads in the winter.


Middle right mounting bolt area









This photo was from April 19th and shows how the rust manifests itself. After disturbing the bolt and surrounding area it all crumbled away. The blackened area is the remains of the P.O.R.15 paint I applied to all the areas after I got it back from the frame replacement.


The two rear mounting bolts. This area is intact









I knew bed removal was pretty simple. and watched a couple of YouTube videos of guys doing it. The bed weighs 400 pounds, so once freed from mounts, fuel filler, and electrical wiring, it takes one guy in each corner to lift it off and carry it to the rear. So the first step was to remove the fuel filler door and disconnect the fuel filler plumbing. It is all braced and attached to the frame underneath and stays in place with the bed removed.









 

Next you need to remove the rear bumper. Because mine came with the factory tow package, the bumper is actually attached to the trailer hitch assembly. As you will see, my receiver was completely rusted to shit, so every single bumper mounting bolt sheared off. This means if I tried to reuse the receiver hitch, I would have to drill and tap all the holes. FUCK THAT! It looks like it spent a decade at the bottom of the ocean, and there is so much scale inside the 2"x2" opening where the hitch goes its difficult to put one in and take one out. So it was going to be replaced. While the chrome plated bumper itself has some bubbles and flaking, the steel core is solid so it is going back on. I am not interested in making a show truck here.

The rear with the bumper removed










A close up of the receiver hitch. Click on the photo to embiggen and see how bad it is.










I had three days off this past week, so the schedule of lining up help and getting stuff done was originally this:

Saturday May 18th 4 guys over for bed removal, flipping over, and placing upside down on blocks

Monday May 20th all welding and fabrication gets done

Tuesday & Wednesday May 21st and 22nd seal, prime, paint, and undercoat bed for re-installation

Well, that didn't go according to plan, but I am not in the least upset because as you'll see things turned out better than imagined. 

The bed removal went well. Of course, one of the six Torx head mounting bolts refused to budge, and in my efforts to remove it I rounded out the area where the bit goes in. No matter. A quick cut of the remaining piece of the rotted structural member with a Sawzall freed the bed. I could deal with getting the stubborn bolt out later standing next to the frame, and I had planned to replace all six mounting bolts anyway.

Lined up waiting for the guys. The bed is just resting on the truck









All done and resting on blocks ready for fabrication & welding









The frame and rusted receiver hitch









My hillbilly temporary light setup so I can drive to work










I need to be able to drive back and forth to work and around town while these repairs are being made, so a crappy grade 2 x 4 from the local building supply ty-wrapped to the end of the frame and some inexpensive trailer lights from Tractor Supply did the trick. The next photo shows the bed in the driveway ready for cutting, fabrication, and welding. The cones are not because of my wife or father-in-law, but UPS, FEDEX, USPS, or any other moron that could run into it.










I should have taken some closeup photos of the rot on the underside but neglected to. The next few photos are my bud cutting away the sheet metal bed pan. He has already drilled out the spot welds and removed the cross braces. The two cross braces with rubber pads that rest on the frame rails in the middle will stay and just get scaled and painted. The front floor stiffener rib will also get scaled and painted, but the rear one is completely corroded and will be removed and replaced.




























Here, he has the two rear holes patched and his temporary grounding lug is on the closest patch. I opted to not use the thin gauge corrugated material, but heavier gauge flat pieces welded to the high spots. The openings on the low spots will be sealed top and bottom with a paintable product called Lexel. I have used it with great success on other projects.















Here are some photos of the finished product. I will hit each section with a wire wheel before sealing, and painting. The project delays came from having the cross pieces fabricated in a shop to spec instead of my buddy making them on site. It added about $150 to the whole job, but they came out fantastic.


























There is a short piece of iron pipe welded into the channel where the mounting holes are that duplicate the factory mount for crush strength. In the last photo you can see the new floor stiffener rib he fabricated as well. From here I turned my attention to the frame, specifically the bumper mount and trailer hitch. The next two photos are of the factory unit prior to removal.

The mounting is the same on both sides









The straight edge in the front is a bumper mount, about to break off










I priced out an OEM replacement through Toyota Parts online. Buying parts this way as opposed to at the parts counter offers a huge discount, and I opt for not paying for shipping but picking them up at the dealership parts department. Even with the discount, this piece listed for a whopping $1928. Holy shit, there must be a better way, and I came up with it saving a little over $1000 that blew away the parts guys for my ingenuity.

As I wrote earlier, my truck came with the factory towing package. But what if it didn't? Well there would be a simple bumper bracket assembly to mount the bumper, and a light duty ball hitch available through the bumper in front of the license plate. That piece listed for $260 and required two additional large frame mounting bolts for $12. So I got it and put it on.

The circle shows where the extra bolt goes, not needed on the factory set up

 

 

 

 

 

 

 

 

The view from the rear after installation










For trucks that don't have factory towing, Class III and Class IV receivers are available from Toyota for easy bolt on installation. Even with the bed on the truck, these bolt right on to the outside of the frame rails and come with instructions and all the necessary hardware. Because my truck was setup for Class IV, that is what I purchased.... for $631!! My father-in-law and I installed everything and placed the bumper where it will need to go, and everything lined up perfectly.

The new tow receiver in place










The only other adjustment I had to make was to angle my tailpipe downward. While it did just barely clear the mounting arm, on bumpy roads I heard it hitting. There is now 1 3/4" of clearance and my exhaust does not move that much so it no longer hits. Turning the exhaust cost another $30 for two 3" stainless steel exhaust clamps. That area is circled in yellow, as well as the additional bolt that was required for the bumper mount.










So, this is where I am so far. I am hoping to get all the sealer, paint, and undercoating Wednesday. My original spare tire was complete garbage so I bought a Toyota rim and a local shop is putting an inexpensive radial tire on it so that will be new too and ready Wednesday. At this point, I should get this whole job done and my truck back on the road fully functional for about $3500.

Work and life has been getting in the way of forward progress, but I can drive to and from work so there is no urgency right now to get it done. I will pick away at it and put up another progress (hopefully to completion) post when I can. Stay tuned.

Thursday, May 16, 2024

Jury Duty 5-14-24

I lived in my previous house in another town for 16 years. During that time I was summoned for jury duty at least 4 times. Two of those times I called the courthouse telephone number the night before and heard a recorded message stating my presence in the court was not needed, and that my obligation had been fulfilled. But twice I actually had to appear in court and go through the screening process. Both times I was rejected for reasons that were quite amusing. One was a civil case where a guy was suing everyone under the sun because he was injured at work. When they asked me my opinion about punitive damages I brought up the idiot woman that held a scalding hot cup of coffee between her legs while she drove away from the McDonald's drive-thru and was burned, receiving millions in punitive damages. I asked if the injured party had his medical bills taken care of which the attorneys assured me they were. The guy cut his face but you could not even tell because he was not disfigured in the least. He fell and hit his head on the garage door window which broke and cut his face, so they were suing the company (Jiffy Lube), the corporate and company management, the builder of the building, the architect, the manufacturer of the door, the manufacturer of the window, etc. STUPID! I got bounced for more than just my statements though, since I was friends with the manager of that Jiffy Lube, brought my company van in there regularly, and the plaintiff's law firm was a customer of my company. The other one was a criminal case of assault of one inmate against another in the state prison system. The defendant sat 25 feet away in front of me looking right at me. The attorneys asked if I could be fair and impartial. I told them absolutely not, because he was a convicted criminal and incarcerated, and therefore a liar because everyone in prison is innocent. Plus I was pretty sure they had him on video six ways from Sunday beating the crap out of his fellow inmate. I was thanked for my honesty and sent on my way.

This was the second time in 19 years in my present residence that I have been called. The first time was like previous times, where I called the courthouse and told I would not have to appear. This notice for jury duty arrived in late March, and in Kommiecticut it is now in the form of an actual court summons. Once upon a time, certain potential jurors were automatically excused right off the bat like cops, firemen, EMT's, doctors, lawyers, etc. No more. Only legislators and officers of the court are automatically exempted (how convenient they have exempted themselves from this burden) and anyone 75 or older can choose to be exempt. You can reschedule your date for any reason, but eventually you will have to appear. I filled out the online juror questionnaire promptly and waited for the notice to come in the mail of how to proceed. The notice with the phone number to call the night before came in the mail about a week before I was scheduled to appear.

Now, I don't really give a shit about doing my civic duty in a *GUN FREE DEATH ZONE like a courthouse that is staffed and guarded by unarmed Judicial Marshall's, with one exception... to engage in Jury Nullification. If I am ever called for a case involving non-criminal self defense and the use of deadly force, I will do everything possible to serve on that jury and cause a hung jury and mistrial. No one that uses deadly force to protect their loved ones or their castle should ever even be charged. But this is Kommiecticut and they will try to prosecute you to the fullest if they think they can build a case. And I don't care how they try to make jury service sound like it is such a glorious thing to do. It is a burden to your life, family, and employer, and it's even worse if you end up sequestered.

On Monday evening the 13th I called the courthouse number... and groaned. The recording said to report to the courthouse Tuesday morning and get checked in by 08:30, and also recommended packing a lunch. Lucky for me it was a scheduled day off so I didn't have to deal with my employer. I packed a lunch like I usually do for work anyway and grabbed a breakfast sandwich at the local convenience store for the road. The courthouse is just over 20 minutes away and I got there early not knowing what the parking situation was. It turns out it is a large open lot right across the street from the courthouse with free parking. I stayed in my truck until I saw a Marshall unlock and open the front door. I left my cooler with lunch in my truck figuring that is where I would eat it at lunch time, and also unloaded and secured my firearm so I could easily enter the *GFDZ which uses airport style security measures. I got in and headed up to the 3rd floor Jury Assembly Room. I carried a book, my summons, a banana, and a bottle of water. You are allowed to have your cell phone so I also had that to read my blogs and be on Twitter. But they warn against posting ANYTHING about the case on social media.

I sat in the room for about 40 minutes as other jurors continued to check in. There were a total of 40-50 people and a mixed cross-section of age, sex, and ethnicity. After everyone was checked in and attendance was verified, the Judge came in to address us for about 10 minutes. I could not believe how young he was... maybe 40? After he left we had to watch a pair of videos. A brief one about jury service, and how honored we should be that we were chosen, which to me was nothing but YAY RAH RAH pro jury propaganda. The other one was about bias, and how everyone has them, but need to suppress them concentrating only on the evidence presented. They beat the phrase "Awareness is Fairness" into the viewer with every person in the video repeating the phrase over and over. Another long period of waiting in the assembly room and then we were herded down stairs to the 2nd floor to the courtroom. They held us in the hall for 10 minutes and then we were lead into the courtroom.

We were seated in the gallery for a few minutes and then told to stand and raise our right hand to be sworn in. We were seated again and introduced to the prosecutors, the defendant, and the defense attorney. We were given the simple facts of the case; the defendant's significant other had a restraining order against him, which he proceeded to violate six times over the span of a week by "contacting" her, whatever that meant. There was never any violence, only "contact." He plead "Not Guilty" and desired a trial.

Now I have an opinion about those useless pieces of paper called restraining orders. They are mostly gotten by women against abusive men. So ladies, if you're gonna get one, back it up like this. When he comes to pay you a visit, you be ready to ventilate with extreme malice. Otherwise it is fucking worthless.








 

 

 

 

 

 

 

 

Anyway, back to my story. The prosecutors then read a list of names of attorneys, witnesses, researchers, investigators, etc. anyone that may be associated with the case. If you knew any of those people you were to raise your hand to let them know, get questioned, and possibly be excused. Two people raised their hand, and the defense attorney stated there was one more person that did not speak up but should have. The attorneys were then called up to the bench to confer with the judge. The two that raised their hands as well as three other people's names were called and ordered to stay in the courtroom, while the rest of us went back up to the Jury Assembly Room to wait.I don't know whom the third individual was and don't care.

Lunch was supposed to be at 1 PM and I was getting hungry. At 1:10 the clerk and a Marshall came in and she read off several names, but not mine. They were told they could leave for lunch and be back by 2:10 PM. Now my being hungry was turning into becoming "Hangry" as I figured I was going to be called back downstairs at some point and my belly would be growling loudly while answering questions. Nope! As soon as those people left, the clerk said, "If I did not call your name, your jury service is over and you may leave for the day. "WOO HOO! I AM OUTTA HERE!!" I left the building and took off in my truck to eat my lunch under a shady tree in the state park I would pass on the way home... which is exactly what I did. Because I actually appeared in court in person, I am exempt from jury duty for the next three years and will be receiving a certificate of proof in case I get called in error.

I got home, changed my clothes, and headed out on "The Beast" for some much needed wind therapy. I ended up at my baby brother's house some 30 miles away whom I haven't seen in a while. My sister-in-law was there too since she works from home. We had a nice visit for a couple of hours before I filled my gas tank and headed home.


*GFDZ = Gun Free Death Zone

Tuesday, April 16, 2024

A Full Day At My Sportsman's Club

Initial Fishing Outing

Yesterday morning the 15th I got up at 04:30 to go fishing at the club pond. It's about 3 acres in size and has a stream feeding it and an outlet to maintain water levels. It is stocked with trout, but there are plenty of bass, yellow perch, and large bluegills in there, and that's what I fish for. All my tackle has crimped barbs on the hook because I do catch and release. I grabbed a quick shower, got dressed, and went outside to get the chickens out for the day and the coop cleaned. I made a commuter mug of coffee, grabbed my gear, and headed out to the club.

I got there around six, and had a line in the water by 06:15 while it was still kind of dark. Being that this was my first outing of the year, I spent some time the night before making sure everything was ready to go. The line on my reel was changed late in the season last year so it was still good. I use Sufix 832 Advanced Superline. Its a fine braided line and I get the dark green that disappears in the water. 20lb test for the size of 6lb monofilament.















I have the remains of a 600yd spool I bought a few years ago and not knowing what was left I bought another 300yd spool at Cabela's a couple of weeks ago. I have more than enough now. I also have a line winder device so it places line on my reels in the proper orientation so it pays out smoothly. The line on both of my reels gets replaced when it starts to look faded or become worn. While at Cabela's I purchased a replacement floating bass plug for the one that I lost late last year. 

Fishing at that pond in the morning seems to have a small window of activity, at least in my experience. In the dark before dawn.... nothing. After dawn and until the sun comes over the horizon and starts hitting the area is when I have my best success. I was fishing from the rocks and was casting left and right parallel to the shore. I tried a couple of different lure setups and nothing. I began using my new floating plug lure smeared with minnow attractant, and felt what I thought was a clump of weeds I snagged. I reeled it in expecting to have to clear my lure and instead found a large and healthy smallmouth bass. It had swallowed my lure and had the rear treble hook stuck a few inches down it's gullet. Luckily I had my long arm hook remover in my pocket, and holding the fish securely, reached in and down and easily backed the hook out of it's flesh. I took a good look at it and sent it on its way. It swam away in a flash obviously no worse for the wear. I smeared on some fresh attractant and started casting along the shore again, This time I got a big hit retrieving my lure from the left and boy was it fighting hard. It was pulling my line and turning the spool in the wrong direction so I tightened the drag a bit while I continued cranking. About 8 feet from shore and BLOOP! it was off the hook and gone. Oh well, that's just the way things go with crimped barbs. I went back to casting. About 10 minutes later, I got another solid hit from the left and started reeling it in. This time I landed a largemouth bass around 11 inches long. It was hooked solidly in the lip and easy to remove by hand. I took a good look at it and then sent it on its way. Back to casting left and right along the shore. WHAM! from the left side again, another large fish putting up a good fight. It broke water about 12 feet out but I could not tell what it was. Just like before, about 8 feet out and it got away. I wondered if maybe it was the same fish. I continued casting for another 15 minutes or so, but the sun was several degrees over the horizon and it was getting really bright. At about 07:20 I called it quits and went home for breakfast. I was happy to have what I deemed a successful morning of fishing in such a short time.

As the weather warms a bit, I will be heading out in my kayak, and if I can get someone else to go with me we'll get out in my motorized canoe. Life jackets are required to be worn here until June 1st, so on my last shopping trip to Cabela's I purchased a lightweight auto-inflating life jacket that will be easier to wear than the one I currently have. This will be especially necessary on cool mornings while wearing an extra layer for warmth.


An Afternoon At The Range

A month or so ago, I stopped by the salon my wife goes to in order to solicit a donation for the sportsman's club upcoming kid's fishing event. The woman that owns it is also a friend of my wife and I and was more than happy to donate to the event. While we were chatting for a while the subject of firearms came up when she asked about the club facilities. It turns out, she has had her Kommiecticut pistol permit for years, and hasn't done any shooting since she got it. Thankfully she doesn't carry a firearm because that would not be a good situation. I offered her an outing at the range and some one-on-one instruction. She told me she is usually available on Mondays and Fridays, so I told her I'd get in touch when it warmed up a bit and I had a Monday or Friday off. The weather forecast for yesterday was sunny with temps in the 70's and I had a scheduled day off, so I texted her Saturday afternoon to invite her to the range. I could read the excitement in her replies. Initially she was not going to bring any of her own firearms she would just use mine. We agreed to meet at the clubhouse at 13:30 so she could fill out the guest waiver which is good for the rest of the calendar year.

I spent the morning after breakfast getting everything together. I thoughtfully picked out a variety of firearms and associated ammo, targets, and miscellaneous equipment. My range bag had most of what I needed, but I also packed my range tote box with my toolbox/cleaning supplies, spotting scope, tripod, and a can of white spray paint. I hate the idea of having to shut down shooting a particular firearm or an entire range day for the want of simple tools or a cleaning rod, so I usually bring the tote, but sometimes just leave it in the truck. I brought seven handguns and three rifles in appropriate carrying cases. I bring ammo in this Bass Pro Shops marine dry box pictured below. It comes with three smaller matching ammo can style containers that go inside, but I use those for other items. The dual latch box holds my reload trays and commercial boxed ammo fine.

Good sized at: 18-3/8" x 12-1/8" x 8-1/4"










I met her right on time in the clubhouse parking lot. After she filled out the form, I handed her the one page list of club range rules to look over while I went inside to file her waiver. When I came out we quickly went over and discussed the rules which are pretty simple. We also discussed The Four Rules of Gun Safety. She followed me down the road to the range in her vehicle. It took a good half hour to unload my truck and get things set up the way I like them. Our handguns stayed in the cases, but the rifles went on the rifle rack with chamber flags at the rear of the range enclosure. Shooting benches were used to hold the handguns, range bags, ammo, and target supplies. We set up two target stands at defensive range of 7 yards with two targets on each stand. When instructing new shooters, it is important that they put rounds on targets. Once they get some confidence you can start moving targets back farther and farther.

I let her choose what to shoot first, and she wisely agreed on my 1935 vintage S&W K-22 Outdoorsman in .22LR. She brought her boyfriends semi-auto S&W 22A-1 and a new box of Winchester .22 ammo but wanted to start with my six shooter. I demonstrated how to open the cylinder, load it, unload it, and fire it on single or double action. I explained how I zero my guns and drew a diagram of what a proper sight picture should look like. She put a couple of cylinders through and was on paper, but high and to the right. I explained that meant she was anticipating recoil and pulling the gun to the right when she pulled the trigger. Once she settled down she was hitting in the black close to center. She then began shooting double action and did quite well. It is a statistical fact that overall, women are better marksman than men. What impressed me was her technique shooting double action. Most people creep the trigger back and try to hold on target waiting for the hammer to drop. She did the proper single motion pull of the trigger. We went down range and I stood in front of her target to show that all of her shots would have counted as center mass hits. We then moved on to her boyfriend's S&W semi-auto. I showed her how to load the magazine and put the gun in battery ready for shooting. I fired it first to see how he had the sights set and so she could see how it functioned. The sights were set for a zero hold. She then fired several mags at the second target on her backboard. She did as well with the semi-auto as she did with my revolver. We replaced her targets and wrote what gun was used on which target so she could show her boyfriend. Time to go a little bigger.

We looked at all the handguns I brought and I explained what each one was. We decided she would start with my 5-shot stainless Rossi M-88 in .38 Special. It is basically an exact copy of a S&W J-Frame Model 60 because when it was made, Rossi and S&W shared the same parent company and shared designs. The gun is only rated for standard .38 Special, not +P which is how I load my home brew .38 SPL ammo. I fired a cylinder full first, a couple of rounds on single action and the rest on double against one of my two targets at 7 yards. She then took the gun, loaded it up and let loose. She said it was pretty powerful, kinda scared her a little, but she REALLY LIKED IT and fired a couple more cylinders doing pretty well. After that was my Ruger GP-161 in .357 Magnum with a 6 inch full lug barrel. I showed her how to open the cylinder, which uses a push button instead of a slide latch. Because the gun shoots .38 SPL and .357 Magnum, she stopped me and asked about the numbers used for the different calibers and what they meant. After a brief explanation, I loaded it up with .38 SPL and fired a cylinder, half on single and half on double at the 25 yard steel plates to demonstrate. She took it and loaded it up and fired it a couple of times. I then loaded it with my .357 Magnum target loads to demonstrate, smacking the plates at 25 yards with every shot and with authority. She was amazed at the flames out the side and I reminded her that was why I explained where NOT to put your fingers when firing a revolver. She declined to fire any magnums and I told her that was her choice, no pressure to do anything she was uncomfortable with.

We then moved to shooting the S&W Governor, which shoots .45 ACP with moon clips, .45 Long Colt, and .410 shotgun shells. She quickly caught on to using my Moon Clip Tool to load a full moon clip, and my L-Cut 1/2" copper plumbing nipple to unload empties. She fired a couple of clips right on target in double action with no problem. I then loaded 3 Federal 000 Buck .410 shotgun shells for demonstration. Each one of those shells contains (4) .30 caliber round balls that group nicely from the Governor at 7 yards. She went and loaded a full cylinder of them and lit them all off in double action punching a lot of holes in her target. We were then going to shoot my SR9c in 9mm. I demonstrated loading a mag with my Uplula loader, and fired all 10 rounds at the 25 yards plates again. When it came time for her to load up, she said she was done, and that those shotgun shells kinda did her in making her arm sore. With that, we were done and packed everything back up. We stopped at the clubhouse on the way out to socialize with a few members that were there and to enjoy a cold brew. Man, that ice cold PBR tasted SOOOOO good. Hopefully the next time we get together, it will be a foursome including my wife and her boyfriend.

Friday, April 5, 2024

2024 Eclipse

"Then you flew your Learjet up to Nova Scotia, to see the total eclipse of the sun."

from "You're So Vain" by Carly Simon

 

The original studio version. Love that album cover photo. I always thought she was pretty hot.


 


 

 

I'm not Carly's mystery man and I don't have a Learjet, but my wife and I will be heading for St. Albans, Vermont on Monday to experience totality for ourselves. A little over 4 hours one way, but it will be a fun road trip and we'll be taking our 3 dogs with us. It will be interesting to see how they react.

 

Here is an excellent live version from aboard the QE2 in 2018. Still lookin' and soundin' good IMHO. The lead guitarist absolutely nails the guitar solo on that black & white Stratocaster.